4 x 8mm large sintered heat-pipes efficiently remove excessive heat away from the CPU,allowing for great Overclocking potential.
Nickel Plated Base and Heatpipes,increase the longevity of the heatsink by slowing oxidation and deterioration rates... maintained performance over time.
Double fin stack design,provides each tower with an impressive 147 x 103mm of surface area for heat dissipation.
Special Arrow fin desing,which allows cool air to pass through while rapidly moving heat away and maintaining quiet operating volume.
Soldered Heat-pipes and Copper Base,ensure all components maintain the highest of Thermal Efficiency.
Support for Multiple-Platforms:Intel Socket 1366/1156/775(AM2/AM3 Optional)
Includes a Quiet 120 x 25mm PWN controlled fan.
Capable of supporting up to three fans for the Ultimate Enthusiast(38mm Fan will fit between the two towers).
Down draft air flow helps to cool CPU surroundings such as MOSFET and North Bridge chipset producing a general reduction in temperature inside your compter case.
Large surface area for cooling(140mm x 140mm)with two ball 140mm silent fan(140mm fan include),balancing noise and performance to suit your preference.
Four nickel-plated heatpipes to reduce oxidation effect,maintaining top performance for long term usage.
Features an all copper base and soldering technology that has each heatsink fins soldered to the heatpipes for a definite contact in producing high efficiency rate of heat transfer.
Low profile CPU cooler with down draft style of air cooling makes it perfect for HTPC; Heatsink total height is 70.2 mm.
Down draft air flow helps to cool CPU surroundings such as MOSFET and North Bridge chipset producing a general reduction in temperature inside your computer case.
Large surface area for cooling (140mm x 140mm) with option to install a 120mm fan or a 140mm silent fan, balancing noise and performance to suit your preference.
Six nickel-plated heatpipes to reduce oxidation effect, maintaining top performance for long term usage.
Features an all copper base and soldering technology that has each heatsink fins soldered to the heatpipes for a definite contact in producing high efficiency rate of heat transfer.
1.Patented multiple support pressure vault bracket system, allow users adding pressure to the bracket system (40~70 lbs.), and have a more efficient and secure mounting.(1366/1156/775).
2.Fanless design for low-noise operation
3.Proprietary through holes on fins for efficient ventilation
4.Heatsink are all nickel plated to ensure the best quality and performance and could last for years.
5.Soldered heatpipes, copper base and fins, to ensure the best thermal conducting efficiency.
6.Six sintered heatpipe design, all heatpipes are nickel plated.To slow the oxidation deterioration to the heatpipe, to ensure longer usage and performance of the heatsink for the cpu.
7.Including 120*25mm fan clips & 140*25mm fan clips and Chill factor III thermal paste.
8.Convex copper base design, to ensure the Highest thermal conducting thermal efficiency between the cpu and the heatsink.
Quiet and powerful cooling due to multiple heat pipes and large aluminum fin area
Proprietary bent winglet design to minimize airflow resistance
6mm heatpipes Black nickel plated to prevent oxidation maintaining best heat transfer condition
Heat pipes soldered to base and fins for optimum heat transfer
Include both bolt-thru-board retention brackets for Intel and AMD
Stack of 48 pieces of aluminum fins, the most over any other heatsinks in the market. Can be covered entirely by a 120mm fan to absorb all in-coming air flow.
Include NEW thermal paste Chill Factor 2
Include 2 sets of fan wire clips for 2 fan installation
Stack of 52 pieces of aluminum fins, the most over any other heatsinks in the market. Can be covered entirely by a 120mm fan to absorb all in-coming air flow.
Vast compatibility list for multiple multi-core CPUs and platforms.
Includes one Ultra low noise “Fluid Dynamic Bearing” fan (1600RPM)
1.All new patented multiple support pressure vault bracket system, allow users adding pressure to the bracket system (40~70 lbs.), and have a more efficient and secure mounting.(1366/1156/775 only).
2.include the new AMD Bolt thru kit Rev.2
3.Mirrored copper base increasingly upgrade the quality and the performance of the heatsink.
4.Special bent winglet design, allows hot air to pass the heatsink more rapidly.
5.Heatsink are all Black nickel plated to ensure the best quality and performance and could last for years.
6.Soldered heatpipes, copper base and fins, to ensure the best thermal conducting efficiency.
7.Six sintered heatpipe design, all heatpipes are nickel plated.To slow the oxidation deterioration to the heatpipe, to ensure longer usage and performance of the heatsink for the cpu.
8.Including 2 sets of 120*25mm fan clips & 140*25mm fan clips and Chill factor III thermal paste.
9.Convex copper base design, to ensure the Highest thermal conducting thermal efficiency between the cpu and the heatsink.
The performance king has returned! The much praised Tuniq Tower 120 has gone through a radical redesign and not only looks cooler but its performance has been boosted. The unique wave-like fins display a tremendous visual impact and increase the air-contact area for an unprecedented thermal performance. The nickel-plated surface combined with the LED fan creates a breath taking visual effect!
To ensure that the maximum cooling performance is obtained, we have also included our highest performing thermal compound, the TX-3. Furthermore, our unique adjustable fan controller places the control in your hands!
The Tuniq Propeller 120 CPU cooler took its visual inspiration from the mighty aircraft carriers. The four specially designed smooth-curving heatpipes are both aesthetically pleasing and highly functional. The 120mm MFDB fan blows downward and is one of the best performing fans on the market; and when matched with the four specially designed heatpipes, the Propeller 120 is able to achieve the same top level performance of competing designs with eight heatpipes. We have also included the top performing TX-3 thermal compound and a fan controller to maximize performance and flexibility.
1.Patented multiple support pressure vault bracket system, allow users adding pressure to the bracket system (40~70 lbs.), and have a more efficient and secure mounting.(1366/1156/775).
2.Fanless design for low-noise operation
3.Proprietary through holes on fins for efficient ventilation
4.Heatsink are all nickel plated to ensure the best quality and performance and could last for years.
5.Soldered heatpipes, copper base and fins, to ensure the best thermal conducting efficiency.
6.Six sintered heatpipe design, all heatpipes are nickel plated.To slow the oxidation deterioration to the heatpipe, to ensure longer usage and performance of the heatsink for the cpu.
7.Including 120*25mm fan clips & 140*25mm fan clips and Chill factor III thermal paste.
8.Convex copper base design, to ensure the Highest thermal conducting thermal efficiency between the cpu and the heatsink.
1.All new patented multiple support pressure vault bracket system, allow users adding pressure to the bracket system (40~70 lbs.), and have a more efficient and secure mounting.(1366/1156/775 only).
2.include the new AMD Bolt thru kit Rev.2
3.Mirrored copper base increasingly upgrade the quality and the performance of the heatsink.
4.Special bent winglet design, allows hot air to pass the heatsink more rapidly.
5.Heatsink are all Black nickel plated to ensure the best quality and performance and could last for years.
6.Soldered heatpipes, copper base and fins, to ensure the best thermal conducting efficiency.
7.Six sintered heatpipe design, all heatpipes are nickel plated.To slow the oxidation deterioration to the heatpipe, to ensure longer usage and performance of the heatsink for the cpu.
8.Including 2 sets of 120*25mm fan clips & 140*25mm fan clips and Chill factor III thermal paste.
9.Convex copper base design, to ensure the Highest thermal conducting thermal efficiency between the cpu and the heatsink.